Files
@ 5553ecc962e0
Branch filter:
Location: kallithea/docs/usage/troubleshooting.rst - annotation
5553ecc962e0
2.2 KiB
text/prs.fallenstein.rst
scripts/i18n: introduce --merge-pot-file to control normalization
There are actually *two* kinds of normalization:
- in main branches, where we just want the translations - not any trivially
derived information or temporary or unstructured data.
- in i18n branches, where we want the trivially derived information, and also
want to preserve any other information there might be in the .po files.
If no pot file is specifed, do it as on the main branches and strip everything
but actual translations. This mode will primarily be used when grafting or
rebasing changes from i18n branches.
When a pot file is specified, run GNU msgmerge with it on the po files. The pot
file should ideally be fully updated (as done by extract_messages). That will
establish a common baseline, leaving only the essential changes as needing merge.
If merging from default branches to 18n, it is better to skip .po and .pot in
first 'hg merge' pass, while resolving everything else. Then, with the
uncommitted merge, run 'extract_messages', and then merge the .po files using
--merge-pot-file kallithea/i18n/kallithea.pot .
(Actually, these two different modes could perhaps be auto detected ...)
There are actually *two* kinds of normalization:
- in main branches, where we just want the translations - not any trivially
derived information or temporary or unstructured data.
- in i18n branches, where we want the trivially derived information, and also
want to preserve any other information there might be in the .po files.
If no pot file is specifed, do it as on the main branches and strip everything
but actual translations. This mode will primarily be used when grafting or
rebasing changes from i18n branches.
When a pot file is specified, run GNU msgmerge with it on the po files. The pot
file should ideally be fully updated (as done by extract_messages). That will
establish a common baseline, leaving only the essential changes as needing merge.
If merging from default branches to 18n, it is better to skip .po and .pot in
first 'hg merge' pass, while resolving everything else. Then, with the
uncommitted merge, run 'extract_messages', and then merge the .po files using
--merge-pot-file kallithea/i18n/kallithea.pot .
(Actually, these two different modes could perhaps be auto detected ...)
aa90719e8520 aa90719e8520 aa90719e8520 aa90719e8520 aa90719e8520 aa90719e8520 aa90719e8520 4e6dfdb3fa01 8b8edfc25856 aa90719e8520 01aca0a4f876 8b8edfc25856 8b8edfc25856 aa90719e8520 aa90719e8520 4e6dfdb3fa01 4e6dfdb3fa01 aa90719e8520 aa90719e8520 8b8edfc25856 aa90719e8520 4e6dfdb3fa01 4e6dfdb3fa01 8b8edfc25856 8b8edfc25856 aa90719e8520 aa90719e8520 4e6dfdb3fa01 4e6dfdb3fa01 aa90719e8520 aa90719e8520 aa90719e8520 aa90719e8520 aa90719e8520 4e6dfdb3fa01 aa90719e8520 aa90719e8520 aa90719e8520 aa90719e8520 4e6dfdb3fa01 4e6dfdb3fa01 aa90719e8520 aa90719e8520 aa90719e8520 03bbd33bc084 4e6dfdb3fa01 4e6dfdb3fa01 4e6dfdb3fa01 4e6dfdb3fa01 4e6dfdb3fa01 4e6dfdb3fa01 aa90719e8520 aa90719e8520 aa90719e8520 03bbd33bc084 03bbd33bc084 aa90719e8520 af2059eead28 af2059eead28 af2059eead28 03bbd33bc084 4a99684543f7 4a99684543f7 4a99684543f7 4a99684543f7 84d2a9aaa1a4 4e6dfdb3fa01 4a99684543f7 af2059eead28 aa90719e8520 cc21a2b86a30 aa90719e8520 aa90719e8520 aa90719e8520 | .. _troubleshooting:
===============
Troubleshooting
===============
:Q: **Missing static files?**
:A: Make sure either to set the ``static_files = true`` in the .ini file or
double check the root path for your http setup. It should point to
for example:
``/home/my-virtual-python/lib/python3.7/site-packages/kallithea/public``
|
:Q: **Can't install celery/rabbitmq?**
:A: Don't worry. Kallithea works without them, too. No extra setup is required.
Try out the great Celery docs for further help.
|
:Q: **Long lasting push timeouts?**
:A: Make sure you set a longer timeout in your proxy/fcgi settings. Timeouts
are caused by the http server and not Kallithea.
|
:Q: **Large pushes timeouts?**
:A: Make sure you set a proper ``max_body_size`` for the http server. Very often
Apache, Nginx, or other http servers kill the connection due to to large
body.
|
:Q: **Apache doesn't pass basicAuth on pull/push?**
:A: Make sure you added ``WSGIPassAuthorization true``.
|
:Q: **Git fails on push/pull?**
:A: Make sure you're using a WSGI http server that can handle chunked encoding
such as ``waitress`` or ``gunicorn``.
|
:Q: **How can I use hooks in Kallithea?**
:A: It's easy if they are Python hooks: just use advanced link in
hooks section in Admin panel, that works only for Mercurial. If
you want to use Git hooks, just install th proper one in the repository,
e.g., create a file `/gitrepo/hooks/pre-receive`. You can also use
Kallithea-extensions to connect to callback hooks, for both Git
and Mercurial.
|
:Q: **Kallithea is slow for me, how can I make it faster?**
:A: See the :ref:`performance` section.
|
:Q: **UnicodeDecodeError on Apache mod_wsgi**
:A: Please read: https://docs.djangoproject.com/en/dev/howto/deployment/wsgi/modwsgi/#if-you-get-a-unicodeencodeerror.
|
:Q: **Requests hanging on Windows**
:A: Please try out with disabled Antivirus software, there are some known problems with Eset Antivirus. Make sure
you have installed the latest Windows patches (especially KB2789397).
.. _python: http://www.python.org/
.. _mercurial: https://www.mercurial-scm.org/
.. _celery: http://celeryproject.org/
.. _rabbitmq: http://www.rabbitmq.com/
.. _python-ldap: http://www.python-ldap.org/
|