Setting up Whoosh full text search

----------------------------------

Kallithea provides full text search of repositories using `Whoosh`__.

.. __: https://whoosh.readthedocs.io/

For an incremental index build, run::

    kallithea-cli index-create -c my.ini

For a full index rebuild, run::

    kallithea-cli index-create -c my.ini --full

The ``--repo-location`` option allows the location of the repositories to be overridden;

usually, the location is retrieved from the Kallithea database.

The ``--index-only`` option can be used to limit the indexed repositories to a comma-separated list::

    kallithea-cli index-create -c my.ini --index-only=vcs,kallithea

To keep your index up-to-date it is necessary to do periodic index builds;

for this, it is recommended to use a crontab entry. Example::

    0  3  *  *  *  /path/to/virtualenv/bin/kallithea-cli index-create -c /path/to/kallithea/my.ini

When using incremental mode (the default), Whoosh will check the last

modification date of each file and add it to be reindexed if a newer file is

available. The indexing daemon checks for any removed files and removes them

from index.

If you want to rebuild the index from scratch, you can use the ``-f`` flag as above,

or in the admin panel you can check the "build from scratch" checkbox.

Integration with issue trackers

-------------------------------

Kallithea provides a simple integration with issue trackers. It's possible

to define a regular expression that will match an issue ID in commit messages,

and have that replaced with a URL to the issue.

This is achieved with following three variables in the ini file::

    issue_pat = #(\d+)

    issue_server_link = https://issues.example.com/{repo}/issue/\1

    issue_sub =

``issue_pat`` is the regular expression describing which strings in

commit messages will be treated as issue references. The expression can/should

have one or more parenthesized groups that can later be referred to in

``issue_server_link`` and ``issue_sub`` (see below). If you prefer, named groups

can be used instead of simple parenthesized groups.

If the pattern should only match if it is preceded by whitespace, add the

following string before the actual pattern: ``(?:^|(?<=\s))``.

If the pattern should only match if it is followed by whitespace, add the

following string after the actual pattern: ``(?:$|(?=\s))``.

These expressions use lookbehind and lookahead assertions of the Python regular

expression module to avoid the whitespace to be part of the actual pattern,

otherwise the link text will also contain that whitespace.

Matched issue references are replaced with the link specified in

``issue_server_link``, in which any backreferences are resolved. Backreferences

can be ``\1``, ``\2``, ... or for named groups ``\g<groupname>``.

The special token ``{repo}`` is replaced with the full repository path

(including repository groups), while token ``{repo_name}`` is replaced with the

repository name (without repository groups).

The link text is determined by ``issue_sub``, which can be a string containing

backreferences to the groups specified in ``issue_pat``. If ``issue_sub`` is

empty, then the text matched by ``issue_pat`` is used verbatim.

The example settings shown above match issues in the format ``#<number>``.

This will cause the text ``#300`` to be transformed into a link:

.. code-block:: html

  <a href="https://issues.example.com/example_repo/issue/300">#300</a>

The following example transforms a text starting with either of 'pullrequest',

'pull request' or 'PR', followed by an optional space, then a pound character

(#) and one or more digits, into a link with the text 'PR #' followed by the

digits::

    issue_pat = (pullrequest|pull request|PR) ?#(\d+)

    issue_server_link = https://issues.example.com/\2

    issue_sub = PR #\2

The following example demonstrates how to require whitespace before the issue

reference in order for it to be recognized, such that the text ``issue#123`` will

not cause a match, but ``issue #123`` will::

    issue_pat = (?:^|(?<=\s))#(\d+)

    issue_server_link = https://issues.example.com/\1

    issue_sub =

If needed, more than one pattern can be specified by appending a unique suffix to

the variables. For example, also demonstrating the use of named groups::

    issue_pat_wiki = wiki-(?P<pagename>\S+)

    issue_server_link_wiki = https://wiki.example.com/\g<pagename>

    issue_sub_wiki = WIKI-\g<pagename>

With these settings, wiki pages can be referenced as wiki-some-id, and every

such reference will be transformed into:

.. code-block:: html

  <a href="https://wiki.example.com/some-id">WIKI-some-id</a>

Refer to the `Python regular expression documentation`_ for more details about

the supported syntax in ``issue_pat``, ``issue_server_link`` and ``issue_sub``.

Hook management

---------------

Hooks can be managed in similar way to that used in ``.hgrc`` files.

To manage hooks, choose *Admin > Settings > Hooks*.

The built-in hooks cannot be modified, though they can be enabled or disabled in the *VCS* section.

To add another custom hook simply fill in the first textbox with

``<name>.<hook_type>`` and the second with the hook path. Example hooks

can be found in ``kallithea.lib.hooks``.

Changing default encoding

-------------------------

By default, Kallithea uses UTF-8 encoding.

This is configurable as ``default_encoding`` in the .ini file.

This affects many parts in Kallithea including user names, filenames, and

encoding of commit messages. In addition Kallithea can detect if the ``chardet``

library is installed. If ``chardet`` is detected Kallithea will fallback to it

when there are encode/decode errors.

The Mercurial encoding is configurable as ``hgencoding``. It is similar to

setting the ``HGENCODING`` environment variable, but will override it.

Celery configuration

--------------------

Kallithea can use the distributed task queue system Celery_ to run tasks like

cloning repositories or sending emails.

Kallithea will in most setups work perfectly fine out of the box (without

Celery), executing all tasks in the web server process. Some tasks can however

take some time to run and it can be better to run such tasks asynchronously in

a separate process so the web server can focus on serving web requests.

For installation and configuration of Celery, see the `Celery documentation`_.

Note that Celery requires a message broker service like RabbitMQ_ (recommended)

or Redis_.

The use of Celery is configured in the Kallithea ini configuration file.

To enable it, simply set::

  use_celery = true

and add or change the ``celery.*`` configuration variables.

Configuration settings are prefixed with 'celery.', so for example setting

`broker_url` in Celery means setting `celery.broker_url` in the configuration

file.

To start the Celery process, run::

  kallithea-cli celery-run -c my.ini

Extra options to the Celery worker can be passed after ``--`` - see ``-- -h``

for more info.

.. note::

   Make sure you run this command from the same virtualenv, and with the same

   user that Kallithea runs.

HTTPS support

-------------

Kallithea will by default generate URLs based on the WSGI environment.

Alternatively, you can use some special configuration settings to control

directly which scheme/protocol Kallithea will use when generating URLs:

- With ``https_fixup = true``, the scheme will be taken from the

  ``X-Url-Scheme``, ``X-Forwarded-Scheme`` or ``X-Forwarded-Proto`` HTTP header

  (default ``http``).

- With ``force_https = true`` the default will be ``https``.

- With ``use_htsts = true``, Kallithea will set ``Strict-Transport-Security`` when using https.

.. _nginx_virtual_host:

Nginx virtual host example

--------------------------

Sample config for Nginx using proxy:

.. code-block:: nginx

    upstream kallithea {

        server 127.0.0.1:5000;

        # add more instances for load balancing

        #server 127.0.0.1:5001;

        #server 127.0.0.1:5002;

    }

    ## gist alias

    server {

       listen          443;

       server_name     gist.example.com;

       access_log      /var/log/nginx/gist.access.log;

       error_log       /var/log/nginx/gist.error.log;

       ssl on;

       ssl_certificate     gist.your.kallithea.server.crt;

       ssl_certificate_key gist.your.kallithea.server.key;

       ssl_session_timeout 5m;

       ssl_protocols SSLv3 TLSv1;

       ssl_ciphers DHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA:EDH-RSA-DES-CBC3-SHA:AES256-SHA:DES-CBC3-SHA:AES128-SHA:RC4-SHA:RC4-MD5;

       ssl_prefer_server_ciphers on;

       rewrite ^/(.+)$ https://kallithea.example.com/_admin/gists/$1;

       rewrite (.*)    https://kallithea.example.com/_admin/gists;

    }

    server {

       listen          443;

       server_name     kallithea.example.com

       access_log      /var/log/nginx/kallithea.access.log;

       error_log       /var/log/nginx/kallithea.error.log;

       ssl on;

       ssl_certificate     your.kallithea.server.crt;

       ssl_certificate_key your.kallithea.server.key;

       ssl_session_timeout 5m;

       ssl_protocols SSLv3 TLSv1;

       ssl_ciphers DHE-RSA-AES256-SHA:DHE-RSA-AES128-SHA:EDH-RSA-DES-CBC3-SHA:AES256-SHA:DES-CBC3-SHA:AES128-SHA:RC4-SHA:RC4-MD5;

       ssl_prefer_server_ciphers on;

       ## uncomment root directive if you want to serve static files by nginx

       ## requires static_files = false in .ini file

       #root /srv/kallithea/kallithea/kallithea/public;

       include         /etc/nginx/proxy.conf;

       location / {

            try_files $uri @kallithea;

       }

       location @kallithea {

            proxy_pass      http://127.0.0.1:5000;

       }

    }

Here's the proxy.conf. It's tuned so it will not timeout on long

pushes or large pushes::

    proxy_redirect              off;

    proxy_set_header            Host $host;

    ## needed for container auth

    #proxy_set_header            REMOTE_USER $remote_user;

    #proxy_set_header            X-Forwarded-User $remote_user;

    proxy_set_header            X-Url-Scheme $scheme;

    proxy_set_header            X-Host $http_host;

    proxy_set_header            X-Real-IP $remote_addr;

    proxy_set_header            X-Forwarded-For $proxy_add_x_forwarded_for;

    proxy_set_header            Proxy-host $proxy_host;

    proxy_buffering             off;

    proxy_connect_timeout       7200;

    proxy_send_timeout          7200;

    proxy_read_timeout          7200;

    proxy_buffers               8 32k;

    client_max_body_size        1024m;

    client_body_buffer_size     128k;

    large_client_header_buffers 8 64k;

.. _apache_virtual_host_reverse_proxy:

Apache virtual host reverse proxy example

-----------------------------------------

Here is a sample configuration file for Apache using proxy:

.. code-block:: apache

    <VirtualHost *:80>

            ServerName kallithea.example.com

            <Proxy *>

              # For Apache 2.4 and later:

              Require all granted

              # For Apache 2.2 and earlier, instead use:

              # Order allow,deny

              # Allow from all

            </Proxy>

            #important !

            #Directive to properly generate url (clone url) for Kallithea

            ProxyPreserveHost On

            #kallithea instance

            ProxyPass / http://127.0.0.1:5000/

            ProxyPassReverse / http://127.0.0.1:5000/

            #to enable https use line below

            #SetEnvIf X-Url-Scheme https HTTPS=1

    </VirtualHost>

Additional tutorial

http://pylonsbook.com/en/1.1/deployment.html#using-apache-to-proxy-requests-to-pylons

.. _apache_subdirectory:

Apache as subdirectory

----------------------

Apache subdirectory part:

.. code-block:: apache

    <Location /PREFIX >

      ProxyPass http://127.0.0.1:5000/PREFIX

      ProxyPassReverse http://127.0.0.1:5000/PREFIX

      SetEnvIf X-Url-Scheme https HTTPS=1

    </Location>

Besides the regular apache setup you will need to add the following line

into ``[app:main]`` section of your .ini file::

    filter-with = proxy-prefix

Add the following at the end of the .ini file::

    [filter:proxy-prefix]

    use = egg:PasteDeploy#prefix

    prefix = /PREFIX

then change ``PREFIX`` into your chosen prefix

.. _apache_mod_wsgi:

Apache with mod_wsgi

--------------------

Alternatively, Kallithea can be set up with Apache under mod_wsgi. For

that, you'll need to:

- Install mod_wsgi. If using a Debian-based distro, you can install

  the package libapache2-mod-wsgi::

    aptitude install libapache2-mod-wsgi

- Enable mod_wsgi::

    a2enmod wsgi

- Add global Apache configuration to tell mod_wsgi that Python only will be

  used in the WSGI processes and shouldn't be initialized in the Apache

  processes::

    WSGIRestrictEmbedded On

- Create a WSGI dispatch script, like the one below. Make sure you

  check that the paths correctly point to where you installed Kallithea

  and its Python Virtual Environment.

  .. code-block:: python

      import os

      # sometimes it's needed to set the current dir

      os.chdir('/srv/kallithea/')

      import site

      site.addsitedir("/srv/kallithea/venv/lib/python3.7/site-packages")

      ini = '/srv/kallithea/my.ini'

      from logging.config import fileConfig

      fileConfig(ini, {'__file__': ini, 'here': '/srv/kallithea'})

      from paste.deploy import loadapp

      application = loadapp('config:' + ini)

  Or using proper virtualenv activation:

  .. code-block:: python

      activate_this = '/srv/kallithea/venv/bin/activate_this.py'

      execfile(activate_this, dict(__file__=activate_this))

      import os

      os.environ['HOME'] = '/srv/kallithea'

      ini = '/srv/kallithea/kallithea.ini'

      from logging.config import fileConfig

      fileConfig(ini, {'__file__': ini, 'here': '/srv/kallithea'})

      from paste.deploy import loadapp

      application = loadapp('config:' + ini)

- Add the necessary ``WSGI*`` directives to the Apache Virtual Host configuration

  file, like in the example below. Notice that the WSGI dispatch script created

  above is referred to with the ``WSGIScriptAlias`` directive.

  The default locale settings Apache provides for web services are often not

  adequate, with `C` as the default language and `ASCII` as the encoding.

  Instead, use the ``lang`` parameter of ``WSGIDaemonProcess`` to specify a

  suitable locale. See also the :ref:`overview` section and the

  `WSGIDaemonProcess documentation`_.

  Apache will by default run as a special Apache user, on Linux systems

  usually ``www-data`` or ``apache``. If you need to have the repositories

  directory owned by a different user, use the user and group options to

  WSGIDaemonProcess to set the name of the user and group.

  Once again, check that all paths are correctly specified.

  .. code-block:: apache

      WSGIDaemonProcess kallithea processes=5 threads=1 maximum-requests=100 \

          python-home=/srv/kallithea/venv lang=C.UTF-8

      WSGIProcessGroup kallithea

      WSGIScriptAlias / /srv/kallithea/dispatch.wsgi

      WSGIPassAuthorization On

  Or if using a dispatcher WSGI script with proper virtualenv activation:

  .. code-block:: apache

      WSGIDaemonProcess kallithea processes=5 threads=1 maximum-requests=100 lang=en_US.utf8

      WSGIProcessGroup kallithea

      WSGIScriptAlias / /srv/kallithea/dispatch.wsgi

      WSGIPassAuthorization On

Other configuration files

-------------------------

A number of `example init.d scripts`__ can be found in

the ``init.d`` directory of the Kallithea source.

.. __: https://kallithea-scm.org/repos/kallithea/files/tip/init.d/ .

.. _python: http://www.python.org/

.. _Python regular expression documentation: https://docs.python.org/2/library/re.html

.. _Mercurial: https://www.mercurial-scm.org/

.. _Celery: http://celeryproject.org/

.. _Celery documentation: http://docs.celeryproject.org/en/latest/getting-started/index.html

.. _RabbitMQ: http://www.rabbitmq.com/

.. _Redis: http://redis.io/

.. _mercurial-server: http://www.lshift.net/mercurial-server.html

.. _PublishingRepositories: https://www.mercurial-scm.org/wiki/PublishingRepositories

.. _WSGIDaemonProcess documentation: https://modwsgi.readthedocs.io/en/develop/configuration-directives/WSGIDaemonProcess.html

#!/bin/sh -e

########################################

#### THIS IS A DEBIAN INIT.D SCRIPT ####

########################################

### BEGIN INIT INFO

# Provides:          kallithea

# Required-Start:    $all

# Required-Stop:     $all

# Default-Start:     2 3 4 5

# Default-Stop:      0 1 6

# Short-Description: starts instance of kallithea

# Description:       starts instance of kallithea using start-stop-daemon

### END INIT INFO

APP_NAME="kallithea"

APP_HOMEDIR="opt"

APP_PATH="/$APP_HOMEDIR/$APP_NAME"

CONF_NAME="production.ini"

PID_PATH="$APP_PATH/$APP_NAME.pid"

LOG_PATH="$APP_PATH/$APP_NAME.log"

PYTHON_PATH="/$APP_HOMEDIR/$APP_NAME-venv"

RUN_AS="root"

DAEMON="$PYTHON_PATH/bin/gearbox"

DAEMON_OPTS="serve --daemon \

 --user=$RUN_AS \

 --group=$RUN_AS \

 --pid-file=$PID_PATH \

 --log-file=$LOG_PATH -c $APP_PATH/$CONF_NAME"

start() {

  echo "Starting $APP_NAME"

      --start --quiet \

      --pidfile $PID_PATH \

      --user $RUN_AS \

      --exec $DAEMON -- $DAEMON_OPTS

}

stop() {

  echo "Stopping $APP_NAME"

  start-stop-daemon -d $APP_PATH \

      --stop --quiet \

      --pidfile $PID_PATH || echo "$APP_NAME - Not running!"

  if [ -f $PID_PATH ]; then

    rm $PID_PATH

  fi

}

status() {

  echo -n "Checking status of $APP_NAME ... "

  pid=`cat $PID_PATH`

  status=`ps ax | grep $pid | grep -ve grep`

  if [ "$?" -eq 0 ]; then

    echo "running"

  else

    echo "NOT running"

  fi

}

case "$1" in

  status)

   status

    ;;

  start)

    start

    ;;

  stop)

    stop

    ;;

  restart)

    echo "Restarting $APP_NAME"

    ### stop ###

    stop

    wait

    ### start ###

    start

    ;;

  *)

    echo "Usage: $0 {start|stop|restart}"

    exit 1

esac

#!/sbin/runscript

########################################

#### THIS IS AN GENTOO INIT.D SCRIPT####

########################################

APP_NAME="kallithea"

APP_HOMEDIR="username/python_workspace"

APP_PATH="/home/$APP_HOMEDIR/$APP_NAME"

CONF_NAME="production.ini"

PID_PATH="$APP_PATH/$APP_NAME.pid"

LOG_PATH="$APP_PATH/$APP_NAME.log"

PYTHON_PATH="/home/$APP_HOMEDIR/v-env"

RUN_AS="username"

DAEMON="$PYTHON_PATH/bin/gearbox"

DAEMON_OPTS="serve --daemon \

--user=$RUN_AS \

--group=$RUN_AS \

--pid-file=$PID_PATH \

--log-file=$LOG_PATH -c $APP_PATH/$CONF_NAME"

#extra options

opts="${opts} restartdelay"

depend() {

    need nginx

}

start() {

    ebegin "Starting $APP_NAME"

        --start --quiet \

        --pidfile $PID_PATH \

        --user $RUN_AS \

        --exec $DAEMON -- $DAEMON_OPTS

    eend $?

}

stop() {

    ebegin "Stopping $APP_NAME"

    start-stop-daemon -d $APP_PATH \

        --stop --quiet \

        --pidfile $PID_PATH || echo "$APP_NAME - Not running!"

    if [ -f $PID_PATH ]; then

        rm $PID_PATH

    fi

    eend $?

}

restartdelay() {

    #stop()

    echo "sleep3"

    sleep 3

    #start()

}

#!/bin/sh

########################################

#### THIS IS A REDHAT INIT.D SCRIPT ####

########################################

##################################################

#

# Kallithea server startup script

# Recommended default-startup: 2 3 4 5

# Recommended default-stop: 0 1 6

#

##################################################

APP_NAME="kallithea"

# the location of your app

# since this is a web app, it should go in /var/www

APP_PATH="/var/www/$APP_NAME"

CONF_NAME="production.ini"

# write to wherever the PID should be stored, just ensure

# that the user you run gearbox as has the appropriate permissions

# same goes for the log file

PID_PATH="/var/run/kallithea/pid"

LOG_PATH="/var/log/kallithea/kallithea.log"

# replace this with the path to the virtual environment you

# made for Kallithea

PYTHON_PATH="/opt/python_virtualenvironments/kallithea-venv"

RUN_AS="kallithea"

DAEMON="$PYTHON_PATH/bin/gearbox"

DAEMON_OPTS="serve --daemon \

    --user=$RUN_AS \

    --group=$RUN_AS \

    --pid-file=$PID_PATH \

    --log-file=$LOG_PATH -c $APP_PATH/$CONF_NAME"

DESC="kallithea-server"

LOCK_FILE="/var/lock/subsys/$APP_NAME"

# source CentOS init functions

. /etc/init.d/functions

RETVAL=0

remove_pid () {

  rm -f ${PID_PATH}

  rmdir `dirname ${PID_PATH}`

}

ensure_pid_dir () {

  PID_DIR=`dirname ${PID_PATH}`

  if [ ! -d ${PID_DIR} ] ; then

    mkdir -p ${PID_DIR}

    chown -R ${RUN_AS}:${RUN_AS} ${PID_DIR}

    chmod 755 ${PID_DIR}

  fi

}

start_kallithea () {

    ensure_pid_dir

        --user $RUN_AS "$DAEMON $DAEMON_OPTS"

    RETVAL=$?

    [ $RETVAL -eq 0 ] && touch $LOCK_FILE

    return $RETVAL

}

stop_kallithea () {

    if [ -e $LOCK_FILE ]; then

      killproc -p $PID_PATH

      RETVAL=$?

      rm -f $LOCK_FILE

      rm -f $PID_PATH

    else

      RETVAL=1

    fi

    return $RETVAL

}

status_kallithea() {

  if [ -e $LOCK_FILE ]; then

    # exit with non-zero to indicate failure

    RETVAL=1

  else

    RETVAL=0

  fi

  return $RETVAL

}

restart_kallithea () {

    stop_kallithea

    start_kallithea

    RETVAL=$?

}

case "$1" in

  start)

    echo -n $"Starting $DESC: "

    start_kallithea

    echo

    ;;

  stop)

    echo -n $"Stopping $DESC: "

    stop_kallithea

    echo

    ;;

  status)

    status_kallithea

    RETVAL=$?

    if [ ! $RETVAL -eq 0 ]; then

      echo "Kallithea server is running..."

    else

      echo "Kallithea server is stopped."

    fi

    ;;

  restart)

    echo -n $"Restarting $DESC: "

    restart_kallithea

    echo

    ;;

  *)

    echo $"Usage: $0 {start|stop|restart|status}"

    RETVAL=1

    ;;

esac

exit $RETVAL