DEMAND

        A server certificate is requested and must be provided and

        authenticated for the session to proceed.

    HARD

        The same as DEMAND.

.. _Base DN:

Base DN : required

    The Distinguished Name (DN) where searches for users will be performed.

    Searches can be controlled by `LDAP Filter`_ and `LDAP Search Scope`_.

.. _LDAP Filter:

LDAP Filter : optional

    A LDAP filter defined by RFC 2254.  This is more useful when `LDAP

    Search Scope`_ is set to SUBTREE.  The filter is useful for limiting

    which LDAP objects are identified as representing Users for

    authentication.  The filter is augmented by `Login Attribute`_ below.

    This can commonly be left blank.

.. _LDAP Search Scope:

LDAP Search Scope : required

    This limits how far LDAP will search for a matching object.

    BASE

        Only allows searching of `Base DN`_ and is usually not what you

        want.

    ONELEVEL

        Searches all entries under `Base DN`_, but not Base DN itself.

    SUBTREE

        Searches all entries below `Base DN`_, but not Base DN itself.

        When using SUBTREE `LDAP Filter`_ is useful to limit object

        location.

.. _Login Attribute:

Login Attribute : required        

    The LDAP record attribute that will be matched as the USERNAME or

    ACCOUNT used to connect to RhodeCode.  This will be added to `LDAP

    Filter`_ for locating the User object.  If `LDAP Filter`_ is specified as

    "LDAPFILTER", `Login Attribute`_ is specified as "uid" and the user has

    connected as "jsmith" then the `LDAP Filter`_ will be augmented as below

    ::

        (&(LDAPFILTER)(uid=jsmith))

.. _ldap_attr_firstname:

First Name Attribute : required

    The LDAP record attribute which represents the user's first name.

.. _ldap_attr_lastname:

Last Name Attribute : required

    The LDAP record attribute which represents the user's last name.

.. _ldap_attr_email:

Email Attribute : required

    The LDAP record attribute which represents the user's email address.

If all data are entered correctly, and python-ldap_ is properly installed

users should be granted access to RhodeCode with ldap accounts.  At this

time user information is copied from LDAP into the RhodeCode user database.

This means that updates of an LDAP user object may not be reflected as a

user update in RhodeCode.

If You have problems with LDAP access and believe You entered correct

information check out the RhodeCode logs, any error messages sent from LDAP

will be saved there.

Active Directory

''''''''''''''''

RhodeCode can use Microsoft Active Directory for user authentication.  This

is done through an LDAP or LDAPS connection to Active Directory.  The

following LDAP configuration settings are typical for using Active

Directory ::

 Base DN              = OU=SBSUsers,OU=Users,OU=MyBusiness,DC=v3sys,DC=local

 Login Attribute      = sAMAccountName

 First Name Attribute = givenName

 Last Name Attribute  = sn

 E-mail Attribute     = mail

All other LDAP settings will likely be site-specific and should be

appropriately configured.

Hook management

---------------

Hooks can be managed in similar way to this used in .hgrc files.

To access hooks setting click `advanced setup` on Hooks section of Mercurial

Settings in Admin. 

There are 4 built in hooks that cannot be changed (only enable/disable by

checkboxes on previos section).

To add another custom hook simply fill in first section with 

<name>.<hook_type> and the second one with hook path. Example hooks

can be found at *rhodecode.lib.hooks*. 

Setting Up Celery

-----------------

Since version 1.1 celery is configured by the rhodecode ini configuration files.

Simply set use_celery=true in the ini file then add / change the configuration 

variables inside the ini file.

Remember that the ini files use the format with '.' not with '_' like celery.

So for example setting `BROKER_HOST` in celery means setting `broker.host` in

the config file.

In order to start using celery run::

 paster celeryd <configfile.ini>

.. note::

   Make sure you run this command from the same virtualenv, and with the same 

   user that rhodecode runs.

HTTPS support

-------------

There are two ways to enable https:

- Set HTTP_X_URL_SCHEME in your http server headers, than rhodecode will

  recognize this headers and make proper https redirections

- Alternatively, change the `force_https = true` flag in the ini configuration 

  to force using https, no headers are needed than to enable https

Nginx virtual host example

--------------------------

Sample config for nginx using proxy::

    server {

       listen          80;

       server_name     hg.myserver.com;

       access_log      /var/log/nginx/rhodecode.access.log;

       error_log       /var/log/nginx/rhodecode.error.log;

       location / {

               root /var/www/rhodecode/rhodecode/public/;

               if (!-f $request_filename){

                   proxy_pass      http://127.0.0.1:5000;

               }

               #this is important if you want to use https !!!

               proxy_set_header X-Url-Scheme $scheme;

               include         /etc/nginx/proxy.conf;  

       }

    }  

Here's the proxy.conf. It's tuned so it will not timeout on long

pushes or large pushes::

    proxy_redirect              off;

    proxy_set_header            Host $host;

    proxy_set_header            X-Host $http_host;

    proxy_set_header            X-Real-IP $remote_addr;

    proxy_set_header            X-Forwarded-For $proxy_add_x_forwarded_for;

    proxy_set_header            Proxy-host $proxy_host;

    client_max_body_size        400m;

    client_body_buffer_size     128k;

    proxy_buffering             off;

    proxy_connect_timeout       7200;

    proxy_send_timeout          7200;

    proxy_read_timeout          7200;

    proxy_buffers               8 32k;

Also, when using root path with nginx you might set the static files to false

in the production.ini file::

    [app:main]

      use = egg:rhodecode

      full_stack = true

      static_files = false

      lang=en

      cache_dir = %(here)s/data

In order to not have the statics served by the application. This improves speed.

Here is a sample configuration file for apache using proxy::

    <VirtualHost *:80>

            ServerName hg.myserver.com

            ServerAlias hg.myserver.com

            <Proxy *>

              Order allow,deny

              Allow from all

            </Proxy>

            #important !

            #Directive to properly generate url (clone url) for pylons

            ProxyPreserveHost On

            #rhodecode instance

            ProxyPass / http://127.0.0.1:5000/

            ProxyPassReverse / http://127.0.0.1:5000/

            #to enable https use line below

            #SetEnvIf X-Url-Scheme https HTTPS=1

    </VirtualHost> 

Additional tutorial

http://wiki.pylonshq.com/display/pylonscookbook/Apache+as+a+reverse+proxy+for+Pylons

Apache as subdirectory

----------------------

Apache subdirectory part::

    <Location /<someprefix> >

      ProxyPass http://127.0.0.1:5000/<someprefix>

      ProxyPassReverse http://127.0.0.1:5000/<someprefix>

      SetEnvIf X-Url-Scheme https HTTPS=1

    </Location> 

Besides the regular apache setup you will need to add the following line

into [app:main] section of your .ini file::

    filter-with = proxy-prefix

Add the following at the end of the .ini file::

    [filter:proxy-prefix]

    use = egg:PasteDeploy#prefix

    prefix = /<someprefix> 

then change <someprefix> into your choosen prefix

Apache's WSGI config

--------------------

Example wsgi dispatch script::

    import os

    os.environ["HGENCODING"] = "UTF-8"

    os.environ['PYTHON_EGG_CACHE'] = '/home/web/rhodecode/.egg-cache'

    # sometimes it's needed to set the curent dir

    os.chdir('/home/web/rhodecode/') 

    from paste.deploy import loadapp

    from paste.script.util.logging_config import fileConfig

    fileConfig('/home/web/rhodecode/production.ini')

    application = loadapp('config:/home/web/rhodecode/production.ini')

Other configuration files

-------------------------

Some example init.d scripts can be found here, for debian and gentoo:

https://rhodecode.org/rhodecode/files/tip/init.d

Troubleshooting

---------------

:Q: **Missing static files?**

:A: Make sure either to set the `static_files = true` in the .ini file or

   double check the root path for your http setup. It should point to 

   for example:

   /home/my-virtual-python/lib/python2.6/site-packages/rhodecode/public

| 

:Q: **Can't install celery/rabbitmq**

:A: Don't worry RhodeCode works without them too. No extra setup is required.

|

:Q: **Long lasting push timeouts?**

:A: Make sure you set a longer timeouts in your proxy/fcgi settings, timeouts

    are caused by https server and not RhodeCode.

| 

:Q: **Large pushes timeouts?**

:A: Make sure you set a proper max_body_size for the http server.

|

:Q: **Apache doesn't pass basicAuth on pull/push?**

:A: Make sure you added `WSGIPassAuthorization true`.

For further questions search the `Issues tracker`_, or post a message in the 

`google group rhodecode`_

.. _virtualenv: http://pypi.python.org/pypi/virtualenv

.. _python: http://www.python.org/

.. _mercurial: http://mercurial.selenic.com/

.. _celery: http://celeryproject.org/

.. _rabbitmq: http://www.rabbitmq.com/

.. _python-ldap: http://www.python-ldap.org/

.. _mercurial-server: http://www.lshift.net/mercurial-server.html

.. _PublishingRepositories: http://mercurial.selenic.com/wiki/PublishingRepositories

.. _Issues tracker: https://bitbucket.org/marcinkuzminski/rhodecode/issues

.. _google group rhodecode: http://groups.google.com/group/rhodecode