Files
@ 5553ecc962e0
Branch filter:
Location: kallithea/setup.py
5553ecc962e0
4.7 KiB
text/x-python
scripts/i18n: introduce --merge-pot-file to control normalization
There are actually *two* kinds of normalization:
- in main branches, where we just want the translations - not any trivially
derived information or temporary or unstructured data.
- in i18n branches, where we want the trivially derived information, and also
want to preserve any other information there might be in the .po files.
If no pot file is specifed, do it as on the main branches and strip everything
but actual translations. This mode will primarily be used when grafting or
rebasing changes from i18n branches.
When a pot file is specified, run GNU msgmerge with it on the po files. The pot
file should ideally be fully updated (as done by extract_messages). That will
establish a common baseline, leaving only the essential changes as needing merge.
If merging from default branches to 18n, it is better to skip .po and .pot in
first 'hg merge' pass, while resolving everything else. Then, with the
uncommitted merge, run 'extract_messages', and then merge the .po files using
--merge-pot-file kallithea/i18n/kallithea.pot .
(Actually, these two different modes could perhaps be auto detected ...)
There are actually *two* kinds of normalization:
- in main branches, where we just want the translations - not any trivially
derived information or temporary or unstructured data.
- in i18n branches, where we want the trivially derived information, and also
want to preserve any other information there might be in the .po files.
If no pot file is specifed, do it as on the main branches and strip everything
but actual translations. This mode will primarily be used when grafting or
rebasing changes from i18n branches.
When a pot file is specified, run GNU msgmerge with it on the po files. The pot
file should ideally be fully updated (as done by extract_messages). That will
establish a common baseline, leaving only the essential changes as needing merge.
If merging from default branches to 18n, it is better to skip .po and .pot in
first 'hg merge' pass, while resolving everything else. Then, with the
uncommitted merge, run 'extract_messages', and then merge the .po files using
--merge-pot-file kallithea/i18n/kallithea.pot .
(Actually, these two different modes could perhaps be auto detected ...)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 | #!/usr/bin/env python3
# -*- coding: utf-8 -*-
import os
import platform
import sys
import setuptools
# monkey patch setuptools to use distutils owner/group functionality
from setuptools.command import sdist
if sys.version_info < (3, 6):
raise Exception('Kallithea requires Python 3.6 or later')
here = os.path.abspath(os.path.dirname(__file__))
def _get_meta_var(name, data, callback_handler=None):
import re
matches = re.compile(r'(?:%s)\s*=\s*(.*)' % name).search(data)
if matches:
s = eval(matches.groups()[0])
if callable(callback_handler):
return callback_handler(s)
return s
_meta = open(os.path.join(here, 'kallithea', '__init__.py'), 'r')
_metadata = _meta.read()
_meta.close()
def callback(V):
return '.'.join(map(str, V[:3])) + '.'.join(V[3:])
__version__ = _get_meta_var('VERSION', _metadata, callback)
__license__ = _get_meta_var('__license__', _metadata)
__author__ = _get_meta_var('__author__', _metadata)
__url__ = _get_meta_var('__url__', _metadata)
# defines current platform
__platform__ = platform.system()
is_windows = __platform__ in ['Windows']
requirements = [
"alembic >= 1.0.10, < 1.5",
"gearbox >= 0.1.0, < 1",
"waitress >= 0.8.8, < 1.5",
"WebOb >= 1.8, < 1.9",
"backlash >= 0.1.2, < 1",
"TurboGears2 >= 2.4, < 2.5",
"tgext.routes >= 0.2.0, < 1",
"Beaker >= 1.10.1, < 2",
"WebHelpers2 >= 2.0, < 2.1",
"FormEncode >= 1.3.1, < 1.4",
"SQLAlchemy >= 1.2.9, < 1.4",
"Mako >= 0.9.1, < 1.2",
"Pygments >= 2.2.0, < 2.6",
"Whoosh >= 2.7.1, < 2.8",
"celery >= 4.3, < 4.5",
"Babel >= 1.3, < 2.9",
"python-dateutil >= 2.1.0, < 2.9",
"Markdown >= 2.2.1, < 3.2",
"docutils >= 0.11, < 0.17",
"URLObject >= 2.3.4, < 2.5",
"Routes >= 2.0, < 2.5",
"dulwich >= 0.19.0, < 0.20",
"mercurial >= 5.2, < 5.4",
"decorator >= 4.2.1, < 4.5",
"Paste >= 2.0.3, < 3.4",
"bleach >= 3.0, < 3.1.4",
"Click >= 7.0, < 8",
"ipaddr >= 2.2.0, < 2.3",
"paginate >= 0.5, < 0.6",
"paginate_sqlalchemy >= 0.3.0, < 0.4",
"bcrypt >= 3.1.0, < 3.2",
]
dependency_links = [
]
classifiers = [
'Development Status :: 4 - Beta',
'Environment :: Web Environment',
'Framework :: Pylons',
'Intended Audience :: Developers',
'License :: OSI Approved :: GNU General Public License (GPL)',
'Operating System :: OS Independent',
'Programming Language :: Python :: 3.6',
'Programming Language :: Python :: 3.7',
'Programming Language :: Python :: 3.8',
'Topic :: Software Development :: Version Control',
]
# additional files from project that goes somewhere in the filesystem
# relative to sys.prefix
data_files = []
description = ('Kallithea is a fast and powerful management tool '
'for Mercurial and Git with a built in push/pull server, '
'full text search and code-review.')
keywords = ' '.join([
'kallithea', 'mercurial', 'git', 'code review',
'repo groups', 'ldap', 'repository management', 'hgweb replacement',
'hgwebdir', 'gitweb replacement', 'serving hgweb',
])
# long description
README_FILE = 'README.rst'
try:
long_description = open(README_FILE).read()
except IOError as err:
sys.stderr.write(
"[WARNING] Cannot find file specified as long_description (%s): %s\n"
% (README_FILE, err)
)
long_description = description
sdist_org = sdist.sdist
class sdist_new(sdist_org):
def initialize_options(self):
sdist_org.initialize_options(self)
self.owner = self.group = 'root'
sdist.sdist = sdist_new
packages = setuptools.find_packages(exclude=['ez_setup'])
setuptools.setup(
name='Kallithea',
version=__version__,
description=description,
long_description=long_description,
keywords=keywords,
license=__license__,
author=__author__,
author_email='kallithea@sfconservancy.org',
dependency_links=dependency_links,
url=__url__,
install_requires=requirements,
classifiers=classifiers,
data_files=data_files,
packages=packages,
include_package_data=True,
message_extractors={'kallithea': [
('**.py', 'python', None),
('templates/**.mako', 'mako', {'input_encoding': 'utf-8'}),
('templates/**.html', 'mako', {'input_encoding': 'utf-8'}),
('public/**', 'ignore', None)]},
zip_safe=False,
entry_points="""
[console_scripts]
kallithea-api = kallithea.bin.kallithea_api:main
kallithea-gist = kallithea.bin.kallithea_gist:main
kallithea-config = kallithea.bin.kallithea_config:main
kallithea-cli = kallithea.bin.kallithea_cli:cli
[paste.app_factory]
main = kallithea.config.middleware:make_app
""",
)
|