Files
@ 8993d401575b
Branch filter:
Location: kallithea/scripts/dbmigrate-test
8993d401575b
3.5 KiB
text/plain
files: fix raw download of repo files with names with unicode points above 256 in name
Raw download had apparently only been tested with non-ascii characters that
were latin1. That was apparently a (too) simple case that worked without
crashing.
Files with unicode code points above 256 in their name would fail to download,
when Waitress failed like this, trying to get a real byte string by encoding
WSGI headers to latin1:
UnicodeEncodeError: 'latin-1' codec can't encode characters in position 84-85: ordinal not in range(256)
HTTP headers are of course byte strings on the network, but Python3 WSGI does
unfortunately neither expose it as bytes nor as unicode strings to be encoded
as utf-8. Instead, it uses unicode strings with byte values encoded as code
points 0-255. That is achieved by decoding the utf-8 encoded bytes as latin1.
For raw downloads, the recommended download filename is provided in the
Content-Disposition header. The problem is that it was provided as a real
unicode string.
Fixed by applying the "proper" latin1-decoding of a utf8-encoding.
Raw download had apparently only been tested with non-ascii characters that
were latin1. That was apparently a (too) simple case that worked without
crashing.
Files with unicode code points above 256 in their name would fail to download,
when Waitress failed like this, trying to get a real byte string by encoding
WSGI headers to latin1:
UnicodeEncodeError: 'latin-1' codec can't encode characters in position 84-85: ordinal not in range(256)
HTTP headers are of course byte strings on the network, but Python3 WSGI does
unfortunately neither expose it as bytes nor as unicode strings to be encoded
as utf-8. Instead, it uses unicode strings with byte values encoded as code
points 0-255. That is achieved by decoding the utf-8 encoded bytes as latin1.
For raw downloads, the recommended download filename is provided in the
Content-Disposition header. The problem is that it was provided as a real
unicode string.
Fixed by applying the "proper" latin1-decoding of a utf8-encoding.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 | #!/bin/sh -e
if [ $# -lt 2 ] || [ $# -gt 3 ]; then
cat >&2 <<EOD
usage: $0 CONFIG_FILE FROM_REV [TO_REV]
Runs a database migration from FROM_REV to TO_REV (default: current
working directory parent), using the specified CONFIG_FILE (.ini file).
Test is run using a clean Kallithea install, in a temporary virtual
environment. FROM_REV and (optional) TO_REV should be Mercurial revision
identifiers (e.g. changeset hash or a version number tag). The working
directory is not touched, but the database referenced in the config file
will be (re)created.
Only SQLite is available out of the box; for MySQL or PostgreSQL, set
the EXTRA environment variable to the required package(s), and it'll
be installed in the virtual environment. (E.g. EXTRA=MySQL-python or
EXTRA=psycopg2.)
The temporary directory is not removed, allowing follow-up examination
of the upgrade results. It is, however, created in /tmp by default,
which many Linux distributions automatically clean at regular intervals.
EOD
exit 1
fi
config_file=$(readlink -f "$1")
from_rev=$2
to_rev=$3
source_repo=$(dirname "$(dirname "$(readlink -f "$0")")")
announce() {
echo
echo "$1"
echo
}
quiet_if_ok() (
local output
local st
set +e
output=$("$@" < /dev/null 2>&1)
st=$?
if [ $st -ne 0 ]; then
echo "$output" >&2
echo "Command $@ returned exit status $st." >&2
exit 1
fi
)
HG() {
"${HG:-hg}" --repository "$source_repo" "$@"
}
# If upgrading to "current revision", warn if working directory is dirty.
if [ ! "$to_rev" ] && [ "$(HG status -mard)" ]; then
announce "Warning: Uncommitted changes in working directory will be ignored!"
fi
from_rev_hash=$(HG id --id --rev "${from_rev:-.}")
to_rev_hash=$(HG id --id --rev "${to_rev:-.}")
temp=$(readlink -f "$(mktemp --tmpdir -d 'dbmigrate-test.XXXXXX')")
cat <<EOD
Config file: $config_file
EOD
sed -n -e 's/^sqlalchemy\.url *= */Database URL: /p' "$config_file"
cat <<EOD
Working dir: $temp
Repository: $source_repo
Upgrade from: $from_rev_hash (${from_rev:-current})
Upgrade to: $to_rev_hash (${to_rev:-current})
Extra packages: ${EXTRA:-(none)}
EOD
mkdir "$temp/repos" # empty
# Enable caching for old pip versions (this will cache the pip upgrade)
# Newer pip versions cache automatically, and don't use this variable.
if [ ! "$PIP_DOWNLOAD_CACHE" ]; then
export PIP_DOWNLOAD_CACHE=$HOME/.cache/pip/legacy
fi
install_kallithea() {
local prefix=$1
local rev=$2
announce "Installing Kallithea $rev in $prefix..."
"${VIRTUALENV:-virtualenv}" --quiet "$prefix-env"
HG archive --rev "$rev" "$prefix"
(
cd "$prefix"
. "$prefix-env/bin/activate"
pip install --quiet --upgrade pip setuptools mercurial $EXTRA
pip install --quiet -e .
)
}
install_kallithea "$temp/from" "$from_rev_hash"
(
cd "$temp/from"
. "$temp/from-env/bin/activate"
announce "Initializing database..."
quiet_if_ok kallithea-cli db-create -c "$config_file" --repos="$temp/repos" --user=doe --email=doe@example.com --password=123456 --no-public-access --force-yes
alembic -c "$config_file" current -v
)
install_kallithea "$temp/to" "$to_rev_hash"
(
cd "$temp/to"
. "$temp/to-env/bin/activate"
announce "Commencing database upgrade from shown Alembic revision to head..."
alembic -c "$config_file" current -v
alembic -c "$config_file" upgrade head
announce "Upgrade complete, now at the shown Alembic revision:"
alembic -c "$config_file" current -v
)
|